Coron’s Pristine Night Sky

Coron’s night sky is probably the best sky I have seen to date. There is no hint of sky glow caused by light pollution. You could see stars from horizon to horizon. The Milky Way is visible even just outside our hotel. To get a better view, we asked a guide to accompany us atop a small hill in Coron. It was impressive to see the Milky Way in a pristine night sky. Here are some photos taken during our visit in Coron, Palawan in 2014.

For a complete list of astrophoto images, click here.
Related link: How To Take Photos of the Milky Way

Night Sky in Focus
Astronomy and Amateur Radio
© Anthony Urbano (Manila, Philippines)

Published by

Eteny

du1au@nightskyinfocus.com

5 thoughts on “Coron’s Pristine Night Sky”

    1. Camera nyo po ba ito sir? Yes sir, pwede po yang camera nyo. Any DSLR will do, or even yung mga hi-end na digital cameras na non-DSLR.

    2. Wow really? yes sir akin yan. try ko kase last week pero alang magandang lumabas heheh meron bang kylangan na required setup? or kylangan kong e modify ung cam ko like your other article?

      Thanks sa info talaga sir.. na inganyo na ako nito :)

    3. No modification needed, straight from the box makakacapture ka na ng Milky Way. Follow these steps:
      1. Set the lens’ focal length to wide-field (e.g., 18 mm).
      2. Set the camera’s exposure time to 30 seconds.
      3. Set the lens’ f-ratio (or f-stop/f-value) to its lowest value (set to widest opening of the iris to accommodate more light, e.g., f/1.8 is more preferred than f/10).
      4. Set the camera’s ISO value to moderate. I usually shoot at ISO 1600.
      5. Check that the camera’s flash remains off.
      6. Attach your camera to a tripod and make sure that it is sturdy and does not shake easily.
      7. Since the camera’s auto-focus function will not work in this case, you need to set the camera’s focus to manual mode. You can do this by toggling a switch on the side of the camera’s lens (consult the camera’s manual).
      8. Set the lens’ focus to infinity. Since the Milky Way is too faint, set the focus using a brighter target (e.g., any bright star). Turn the focus ring clockwise or counterclockwise (consult the camera’s manual) to bring any bright star into focus. You may need to look through the view finder first to roughly focus onto a star and then use the camera’s electronic display (e.g., LiveVeiw) to achieve a more precise focus.
      9. Point the camera to the general direction of the Milky Way (use star maps).
      10. Turn on the camera’s time-delay feature to avoid shaking (10-second delay will do).
      11. When ready, press the shutter to take your shot. In this case, the camera will expose for 30 seconds. During exposure, you must not allow any stray light to reach the camera’s sensor, and certainly not allow the camera to move or shake. You may need to shoot several times for proper framing.
      For more info, click here.
      Good luck!

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s