I have built a DIY dipole antenna for VHF (2 meter) and UHF (70 cm ) bands. I used 1/4 in diameter copper tube elements. The VHF driven element is center-fed while the UHF element is coupled (placed in close proximity but not connected to the coaxial cable) with the VHF driven element. A 5 meter RG8 coaxial cable feedline is used, with no balun. The feed point is housed in a weatherproof plastic enclosure, with one side of the VHF dipole connects to the coaxial cable’s center conductor and the other side connected to the outer conductor.
In this particular antenna, the VHF element has a total length of 984 mm (split in the center, to form two 1/4 wavelength element with 492 mm on each side) and the UHF element is 325 mm (1/2 wavelength element, not split in the middle). Adjust the lengths of the VHF and UHF elements for lowest SWR on the desired operating frequency.
To view all posts about amateur radio, click here.
Night Sky in Focus | Astronomy and Amateur Radio © Anthony Urbano | Manila, Philippines