DIY Arduino TNC

I have finished building and testing a DIY Terminal Node Controller (TNC). With a TNC, any radio may encode and decode signals in the Automatic Packet Reporting System (APRS) format. This TNC is based on the home-brewed TNC project by VK3DAN.

Arduino-based TNC

The TNC requires a smart phone with APRSdroid connected via bluetooth. It taps directly to a radio through the dedicated audio line-in and line-out ports. I’ve tested this TNC to work with the International Space Station’s (ISS) digipeater at 145.825 MHz, using the digipath: ARISS.

To view all posts about amateur radio, click here.

Night Sky in Focus | Astronomy and Amateur Radio
© Anthony Urbano | Manila, Philippines